Pro-window static window film

  • High-quality PVC material
  • Easy to (de)mount
  • Diffuses light
The Pro-Window series guarantees your privacy through various patterns of frosted glass window films. They are static films that can be used on various glass surfaces such as windows, showcases, and doors. Made of high-quality PVC material, they are adhesive-free, allowing them to be reused repeatedly without leaving any traces after removal. This makes them rental-friendly films as well.

  • Non-toxic
  • Guaranteed privacy
  • Suitable for various glass surfaces
  • Rental-friendly
Delivery Specifications
Applying Pro-Window Film

Supplies Needed:
- Roll of Pro-Window film
- Squeegee and sharp utility knife
- Scraper
- Ammonia
- Microfiber cloth
- Bucket of water

Installation:
1. Clean your window by adding a little ammonia to the bucket of water
2. Thoroughly dry the window with care
3. Cut the film to size (ensure at least 5 cm overlap on all sides)
4. Remove the protective layer from the film
5. Apply the film from the top onto the window (utilize the 5 cm overlap)
6. Press the film firmly while working downward
7. Smooth out any wrinkles in the film with the squeegee (always work from inside to outside)
8. Press the film firmly into the corners and edges
9. Place the squeegee against the window and use it to slowly trim away the overlap with the Olfa utility knife (use a new blade for each side)

Note: Only remove the film from the roll when you are actually ready to apply it! If you remove the film earlier and set it aside because you plan to apply it later, air tunnels may form in the film that will not dissipate.

Questions or advice?

 info@drsticker.nl

Options

Variant (Make a choice)
Plain
Blocked
Lines
Striped
Size (Make a choice)
45 x 150 cm
67.5 x 150 cm
90 x 150 cm

Prices

Thursday, January 23