Carbon Foil - 3D Carbon Foil Black

This 3D Carbon foil is especially suitable for flat to slightly curved surfaces, but when using heat (for example, a hair dryer), the foil can also be used to wrap materials.

Do you want to give your car, motorcycle or interior a cool and unique look? Then our Pro-Vinyl 3D Carbon wrap film is exactly what you need! Not only does it provide excellent protection against scratches and damage, but it also gives your vehicle a sporty look.

Our carbon sticker wrap film is made of high-quality polymer PVC material with a 3D carbon fiber structure, which provides a realistic and cool carbon effect. It is very flexible and can be easily applied to flat or slightly curved surfaces of cars, motorcycles and other vehicles.

To apply the wrap film easily and successfully, we have put together a handy adhesive guide for you. Below are some important steps to ensure that the wrap film is applied perfectly:

1. Clean the surface of the vehicle thoroughly and remove any grease with a cleaning agent.

2. Carefully measure the required amount of wrap film and cut it to size.

3. Peel off the protective film from the wrap film and carefully place it on the vehicle.

4. Press the wrap film firmly using a squeegee to prevent air bubbles and folds.

5. Carefully cut off any overlaps or edges with a sharp knife.

6. Heat the wrap film slightly with a hair dryer to activate the material and adapt it to the shape of the vehicle.

Our carbon sticker wrap film not only offers protection and a sporty look, but is also very durable and easy to maintain. It is resistant to weather influences and UV radiation, and can be easily cleaned with a mild detergent and water.

Product features

Foil type: Black PVC vinyl

Adhesive: Transparent, polyacrylate, bubble free

Foil thickness: 150 microns

Backing paper thickness: 140g/m²

Roll width: 117 cm

Expected lifespan: 1-3 years

 

Dimensions:

This foil is available in dimensions 117 cm by 1 meter, and can be ordered in multiples

NB:

• Only remove the foil from the tube once you are actually going to stick! Do you remove the foil earlier and put it aside because you want to stick it later? Air tunnels can then form in the foil that no longer disappear.
• When removing the foil, adhesive residue may remain.
• This foil is suitable for all non-porous surfaces provided they are made free of dust and grease. Not suitable for untreated wood, first provide the wood with a primer or paint/lacquer layer.
• We only accept rolls back if they are unused, not yet cut and/or opened/damaged.

Article number:	3dCF-01
Availability:	In stock