The blind spot warning stickers are mandatory in France from January 1, 2021. From this date, all heavy vehicles, trucks, buses, above 3.5 tons are required to affix a blind spot warning sticker to the car.
In addition to these standard quality stickers, we also have a premium variant with a longer lifespan and high-tack removable adhesive. This can be ordered here
R 313-32-1 is an official traffic rule that has been included in the French highway code from 1 January. Failure to comply with this rule will result in fines of Class 4 (minimum 90 euros). So quickly order your blind spot warning stickers at Dr.Sticker and avoid fines!
We use the recommended dimensions of 25 cm height x 17 cm width. According to traffic rule R 313-32-1, a number of color references are specified. We adhere to the CMYK values indicated here.
It is important to know exactly where the stickers should be mounted on the vehicles, because fines can also be handed out if the stickers are placed incorrectly.
For trucks and tractors, the stickers must be applied on both sides of the vehicle and at the rear. On both sides, the stickers must be applied to the front part, measured at a height of between 0.9 and 1.5 meters from the ground. The decal must be affixed to the right side of the truck or tractor at the rear. Here too, the sticker must be applied at a height of between 0.9 and 1.5 meters from the ground.
Stickers must also be affixed to trailers and semi-trailers. On the rear, the sticker must be affixed to the right side at a height of between 0.9 and 1.5 metres, just as with trucks and tractors. In addition, the stickers must also be applied on each side. On the bodywork, this must be done within the first meter (at a height of 0.9 - 1.5 metres). For the semi-trailers, the stickers must be applied on both sides within the first meter behind the fifth wheel (at a height of 0.9 - 1.5 metres).
There are a number of exceptions to the rule. This applies to vehicles where it is technically impossible to affix the stickers to the prescribed locations on the vehicle. In this case, the decals should be applied at the closest height possible, as long as it falls within the 2.10 meter limit.
Some examples of vehicles where the stickers may be applied in other places are car transporters, tractors for semi-trailers, container chassis, platform vehicles, tank vehicles, adjustable arms for dump trucks and dollies. On these vehicles it is not possible to affix the markings to the rear of the vehicle, therefore the decal may be placed in a position compatible with the characteristics of the vehicle.
Vehicles where it is structurally impossible to affix the stickers to the side and/or rear are exempt from the blind spot sticker regulation.
This variant is especially for trucks, if you are looking for a sticker for buses you can find it here:Bus stickers
These warning stickers are made of a monomeric material that is finished with an extra gloss laminate. The extra laminate layer makes the stickers extra scratch and weather resistant and therefore suitable for outdoor use on vehicles.
These blind spot stickers are 17 centimeters wide and 25 centimeters high (17 x 25 cm, wxh) and are finished with rounded corners. You order the stickers from 1 piece.
Do you not only drive in France and do you prefer a non-permanent solution? Then you can also order the warning stickers on magnet material from us, this variant for trucks can be found here , and the variant for buses can be found here .
| Material: | Orajet 3164 + Oraguard 200 gloss laminate |
| Printing: | Full color weatherproof printed |
| Format | 17 x 25CM |
| Form: | With rounded corners |
| Quality: | Suitable for indoor and outdoor use |
| Article number: | VRACHT-STICK |
| Availability: | In stock |
| Delivery time: | 4 working days |
| Unit price: | €0,00 / |
| Material: | Orajet 3164 + 200 Gloss laminate |
| Print: | Full colour weatherproof printed |
| Form: | With rounded corners |
| Quality: | Suitable for indoor and outdoor use |
