As of January 1, 2021, France will introduce mandatory blind spot warning stickers. All heavy vehicles, trucks, buses, above 3.5 tons driving in urban areas are required from this date to affix a warning sticker to their vehicle. So also vehicles with a foreign license plate. So if you also drive in France, it is necessary for you to purchase these warning stickers.
The new regulation is an official traffic rule that will be included in the highway code under the name R 313-32-1 . Failure to comply with this traffic rule will be punished with a Class 4 fine. So avoid fines and order your warning stickers quickly from Dr.Sticker.
We use the recommended dimensions of 25 cm height x 17 cm width. According to traffic rule R 313-32-1, a number of color references are specified. We adhere to the CMYK values indicated here.
It is important that the stickers are mounted in the right places on the vehicle.
On trucks and tractors it is mandatory to affix the stickers to both sides and the rear of the vehicle. The sticker on the rear of the vehicle must be placed on the right side between 0.9 and 1.5 meters from the ground. The stickers must be applied at the front on both sides (also at a height between 0.9 and 1.5 meters from the ground).
The stickers must also be affixed to the rear of the vehicle on trailers and semi-trailers, on the right side of the rear and at a height of between 0.9 and 1.5 metres. The stickers must also be applied to each side. This means that the sticker must be applied within the first meter of the bodywork at a height of between 0.9 and 1.5 metres. On the semi-trailers, the stickers must be applied on both sides within the first meter behind the fifth wheel (also at a height between 0.9 and 1.5 metres).
There are a number of exceptions to the rule for vehicles where it is technically impossible to properly affix the warning stickers to the vehicle. In this case, the decals should be applied at the closest height possible, as long as it falls within the 2.10 meter limit.
In the case of, for example, car transporters, container chassis, tractors for semi-trailers, but also platform vehicles, tank vehicles, adjustable arms for dump trucks and dollies where it is not possible to affix the marking to the rear of the vehicle, the sticker may be affixed to a place that compatible with the characteristics of the vehicle.
Vehicles where it is structurally impossible to affix the stickers to the side and/or rear are exempt from the blind spot sticker regulation.
This variant is especially for buses, if you are looking for a sticker for trucks, you can find it here: Truck stickers
The stickers are made of a monomeric sticker vinyl that is finished with a gloss laminate. Due to the extra laminate layer, the stickers are extra scratch and weather resistant and therefore suitable for use on vehicles.
These blind spot stickers are 17 centimeters wide and 25 centimeters high (17 x 25 cm, wxh) and are finished with rounded corners. You order the stickers from 1 piece.
| Material: | Orajet 3164 + Oraguard 200 gloss laminate |
| Printing: | Full color weatherproof printed |
| Format | 17 x 25CM |
| Form: | With rounded corners |
| Quality: | Suitable for indoor and outdoor use |
| Article number: | BUS-STICK |
| Availability: | In stock |
| Delivery time: | 4 working days |
| Unit price: | €0,00 / |
| Material: | Orajet 3164 + 200 Gloss laminate |
| Print: | Full colour weatherproof printed |
| Form: | With rounded corners |
| Quality: | Suitable for indoor and outdoor use |
